Fóruns sobre PHP, JavaScript, HTML, MySQLi, jQuery, Banco de Dados, CSS


Moderador: web

 
Mais de 100 postagens
Mais de 100 postagens
Tópico Autor
Mensagens: 108
Nome: Bruno
Localização: portugal
Contato:

contador de acesso ao site

29-10-2008 13:03

Olá pessoal.
Quero colocar um contador de entradas no site, e procurei aqui no forum e encontrei um artigo:

http://www.codigosnaweb.com/forum/viewt ... tador#p193

Mas com esse codigo cada vez que faço refresh ou clico num link ele incrementa o contador,o que nao queria.
Tem algum que controle isso com o IP ou cookies???
Cumprimentos
0
Cumprimentos
 
Avatar do usuário
ADMIN
ADMIN
Mensagens: 17739
Nome: Kleber
Descrição do site: Onde você encontra scripts grátis para o seu site
Sexo: Masculino
Localização: RJ / RJ / Brasil
Contato:

contador de acesso ao site

29-10-2008 13:23

Ai está, no código, 60 é relativo a sessenta segundos de duração do cookie.

<?php $arquivo = "contando.txt"; $valor = 1; $id = fopen($arquivo, "r+"); $conteudo = fread($id,filesize($arquivo)); fclose($id); if($_COOKIE['ip']=='') { $conteudo += $valor; $id = fopen($arquivo, "r+"); fwrite($id, $conteudo, strlen($conteudo)); fclose($id); SetCookie("ip",$_SERVER['REMOTE_ADDR'], time()+60); } else { SetCookie("ip",$_SERVER['REMOTE_ADDR'], time()+60); } echo "$conteudo"; ?>

0
A melhor hospedagem para o seu site HostGator!
 
Mais de 100 postagens
Mais de 100 postagens
Tópico Autor
Mensagens: 108
Nome: Bruno
Localização: portugal
Contato:

contador de acesso ao site

29-10-2008 13:35

Mas sempre que faço refresh da pagina ou clico num link ele incrementa o contador.
Outra coisa,não e guardado nenhum valor total de visistas, este e so para o momento, nao tens um que guarde num txt o numerototal de visitas, que no final de contas e o que quero???
0
Cumprimentos
 
Avatar do usuário
ADMIN
ADMIN
Mensagens: 17739
Nome: Kleber
Descrição do site: Onde você encontra scripts grátis para o seu site
Sexo: Masculino
Localização: RJ / RJ / Brasil
Contato:

contador de acesso ao site

29-10-2008 13:46

Acho que você não testou o script, se notar ele usa o arquivo contando.txt para armazenar o número de visitas, usa cookie para não permitir um contagem do mesmo IP em até 60 segundos ( o que pode ser trocado por você ).
0
A melhor hospedagem para o seu site HostGator!
 
Mais de 100 postagens
Mais de 100 postagens
Tópico Autor
Mensagens: 108
Nome: Bruno
Localização: portugal
Contato:

contador de acesso ao site

29-10-2008 14:05

ya tens razao tava a misturar outro script aqui do forum......
Funciona impecavel..e exactamente o que quero.
Obrigado
0
Cumprimentos
 
Avatar do usuário
ADMIN
ADMIN
Mensagens: 17739
Nome: Kleber
Descrição do site: Onde você encontra scripts grátis para o seu site
Sexo: Masculino
Localização: RJ / RJ / Brasil
Contato:

contador de acesso ao site

29-10-2008 14:12

:wink
0
A melhor hospedagem para o seu site HostGator!
 
Mais de 75 postagens
Mais de 75 postagens
Mensagens: 76
Sexo: Masculino
Localização: Porto Alegre
Contato:

contador de acesso ao site

02-11-2008 21:25

no meu não deu certo... ele continua contando e não limita por ip!

o meu está assim:
<?php // Contador de acessos $arquivo = "files/contador.ini"; $valor = 1; // Valor agregado por visita $timecookie = 300; // Duração do cookie para não contar o mesmo ip (300s = 5min) $id = fopen($arquivo, "r+"); $conteudo = fread($id,filesize($arquivo)); fclose($id); if($_COOKIE['ip']=='') { $conteudo += $valor; $id = fopen($arquivo, "r+"); fwrite($id, $conteudo, strlen($conteudo)); fclose($id); SetCookie("ip",$_SERVER['REMOTE_ADDR'], time()+$timecookie); } else { SetCookie("ip",$_SERVER['REMOTE_ADDR'], time()+$timecookie); } echo "$conteudo"; ?>

qual o problema?
0
 
Avatar do usuário
ADMIN
ADMIN
Mensagens: 17739
Nome: Kleber
Descrição do site: Onde você encontra scripts grátis para o seu site
Sexo: Masculino
Localização: RJ / RJ / Brasil
Contato:

contador de acesso ao site

02-11-2008 21:31

O indicado é txt, com permissão 777, no caso seu script está assim

files/contador.ini

O ideal é dá permissão 777 em files/ e renomear contador.ini para contador.txt também com permissão 777
0
A melhor hospedagem para o seu site HostGator!
 
Mais de 75 postagens
Mais de 75 postagens
Mensagens: 76
Sexo: Masculino
Localização: Porto Alegre
Contato:

contador de acesso ao site

02-11-2008 21:39

tudo bem... que seja .txt, mudei a extensão e continua contando sem limite.

O que pode ser? Os cookies estão habilitados e ta assim tanto no FF quanto no IE.
0
 
Avatar do usuário
ADMIN
ADMIN
Mensagens: 17739
Nome: Kleber
Descrição do site: Onde você encontra scripts grátis para o seu site
Sexo: Masculino
Localização: RJ / RJ / Brasil
Contato:

contador de acesso ao site

02-11-2008 21:40

Tá rodando em PHP4? Porque aparentemente os cookies não estão sendo salvos.
0
A melhor hospedagem para o seu site HostGator!
 
Mais de 75 postagens
Mais de 75 postagens
Mensagens: 76
Sexo: Masculino
Localização: Porto Alegre
Contato:

contador de acesso ao site

02-11-2008 21:49

php5
0
 
Avatar do usuário
ADMIN
ADMIN
Mensagens: 17739
Nome: Kleber
Descrição do site: Onde você encontra scripts grátis para o seu site
Sexo: Masculino
Localização: RJ / RJ / Brasil
Contato:

contador de acesso ao site

02-11-2008 22:11

Testei aqui o script, no servidor local com PHP 5 e no servidor online, ambos mantém o contador fixo. Já tive esse problema ai de ignorar o cookie, agora não lembro bem se era problema do servidor ou do navegador.
0
A melhor hospedagem para o seu site HostGator!
 
Mais de 75 postagens
Mais de 75 postagens
Mensagens: 76
Sexo: Masculino
Localização: Porto Alegre
Contato:

contador de acesso ao site

03-11-2008 12:04

Coloquei PHP6 e continua sem limites...

To achando que é na configuração do php. Vê se está correta a configuração do meu php.ini

[PHP] ;;;;;;;;;;;;;;;;;;; ; About php.ini ; ;;;;;;;;;;;;;;;;;;; ; This file controls many aspects of PHP's behavior. In order for PHP to ; read it, it must be named 'php.ini'. PHP looks for it in the current ; working directory, in the path designated by the environment variable ; PHPRC, and in the path that was defined in compile time (in that order). ; Under Windows, the compile-time path is the Windows directory. The ; path in which the php.ini file is looked for can be overridden using ; the -c argument in command line mode. ; ; The syntax of the file is extremely simple. Whitespace and Lines ; beginning with a semicolon are silently ignored (as you probably guessed). ; Section headers (e.g. [Foo]) are also silently ignored, even though ; they might mean something in the future. ; ; Directives are specified using the following syntax: ; directive = value ; Directive names are *case sensitive* - foo=bar is different from FOO=bar. ; ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo"). ; ; Expressions in the INI file are limited to bitwise operators and parentheses: ; | bitwise OR ; & bitwise AND ; ~ bitwise NOT ; ! boolean NOT ; ; Boolean flags can be turned on using the values 1, On, True or Yes. ; They can be turned off using the values 0, Off, False or No. ; ; An empty string can be denoted by simply not writing anything after the equal ; sign, or by using the None keyword: ; ; foo = ; sets foo to an empty string ; foo = none ; sets foo to an empty string ; foo = "none" ; sets foo to the string 'none' ; ; If you use constants in your value, and these constants belong to a ; dynamically loaded extension (either a PHP extension or a Zend extension), ; you may only use these constants *after* the line that loads the extension. ; ; ;;;;;;;;;;;;;;;;;;; ; About this file ; ;;;;;;;;;;;;;;;;;;; ; This is the recommended, PHP 5-style version of the php.ini-dist file. It ; sets some non standard settings, that make PHP more efficient, more secure, ; and encourage cleaner coding. ; ; The price is that with these settings, PHP may be incompatible with some ; applications, and sometimes, more difficult to develop with. Using this ; file is warmly recommended for production sites. As all of the changes from ; the standard settings are thoroughly documented, you can go over each one, ; and decide whether you want to use it or not. ; ; For general information about the php.ini file, please consult the php.ini-dist ; file, included in your PHP distribution. ; ; This file is different from the php.ini-dist file in the fact that it features ; different values for several directives, in order to improve performance, while ; possibly breaking compatibility with the standard out-of-the-box behavior of ; PHP. Please make sure you read what's different, and modify your scripts ; accordingly, if you decide to use this file instead. ; ; - register_long_arrays = Off [Performance] ; Disables registration of the older (and deprecated) long predefined array ; variables ($HTTP_*_VARS). Instead, use the superglobals that were ; introduced in PHP 4.1.0 ; - display_errors = Off [Security] ; With this directive set to off, errors that occur during the execution of ; scripts will no longer be displayed as a part of the script output, and thus, ; will no longer be exposed to remote users. With some errors, the error message ; content may expose information about your script, web server, or database ; server that may be exploitable for hacking. Production sites should have this ; directive set to off. ; - log_errors = On [Security] ; This directive complements the above one. Any errors that occur during the ; execution of your script will be logged (typically, to your server's error log, ; but can be configured in several ways). Along with setting display_errors to off, ; this setup gives you the ability to fully understand what may have gone wrong, ; without exposing any sensitive information to remote users. ; - output_buffering = 4096 [Performance] ; Set a 4KB output buffer. Enabling output buffering typically results in less ; writes, and sometimes less packets sent on the wire, which can often lead to ; better performance. The gain this directive actually yields greatly depends ; on which Web server you're working with, and what kind of scripts you're using. ; - register_argc_argv = Off [Performance] ; Disables registration of the somewhat redundant $argv and $argc global ; variables. ; - magic_quotes_gpc = Off [Performance] ; Input data is no longer escaped with slashes so that it can be sent into ; SQL databases without further manipulation. Instead, you should use the ; function addslashes() on each input element you wish to send to a database. ; - variables_order = "GPCS" [Performance] ; The environment variables are not hashed into the $_ENV. To access ; environment variables, you can use getenv() instead. ; - error_reporting = E_ALL [Code Cleanliness, Security(?)] ; By default, PHP suppresses errors of type E_NOTICE. These error messages ; are emitted for non-critical errors, but that could be a symptom of a bigger ; problem. Most notably, this will cause error messages about the use ; of uninitialized variables to be displayed. ; - allow_call_time_pass_reference = Off [Code cleanliness] ; It's not possible to decide to force a variable to be passed by reference ; when calling a function. The PHP 4 style to do this is by making the ; function require the relevant argument by reference. ; - short_open_tag = Off [Portability] ; Using short tags is discouraged when developing code meant for redistribution ; since short tags may not be supported on the target server. ;;;;;;;;;;;;;;;;;;;; ; Language Options ; ;;;;;;;;;;;;;;;;;;;; ; Enable the PHP scripting language engine under Apache. engine = On ; Enable compatibility mode with Zend Engine 1 (PHP 4.x) zend.ze1_compatibility_mode = Off ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized. ; NOTE: Using short tags should be avoided when developing applications or ; libraries that are meant for redistribution, or deployment on PHP ; servers which are not under your control, because short tags may not ; be supported on the target server. For portable, redistributable code, ; be sure not to use short tags. short_open_tag = Off ; Allow ASP-style <% %> tags. asp_tags = Off ; The number of significant digits displayed in floating point numbers. precision = 14 ; Enforce year 2000 compliance (will cause problems with non-compliant browsers) y2k_compliance = On ; Output buffering allows you to send header lines (including cookies) even ; after you send body content, at the price of slowing PHP's output layer a ; bit. You can enable output buffering during runtime by calling the output ; buffering functions. You can also enable output buffering for all files by ; setting this directive to On. If you wish to limit the size of the buffer ; to a certain size - you can use a maximum number of bytes instead of 'On', as ; a value for this directive (e.g., output_buffering=4096). output_buffering = 4096 ; You can redirect all of the output of your scripts to a function. For ; example, if you set output_handler to "mb_output_handler", character ; encoding will be transparently converted to the specified encoding. ; Setting any output handler automatically turns on output buffering. ; Note: People who wrote portable scripts should not depend on this ini ; directive. Instead, explicitly set the output handler using ob_start(). ; Using this ini directive may cause problems unless you know what script ; is doing. ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" ; and you cannot use both "ob_gzhandler" and "zlib.output_compression". ; Note: output_handler must be empty if this is set 'On' !!!! ; Instead you must use zlib.output_handler. ;output_handler = ; Transparent output compression using the zlib library ; Valid values for this option are 'off', 'on', or a specific buffer size ; to be used for compression (default is 4KB) ; Note: Resulting chunk size may vary due to nature of compression. PHP ; outputs chunks that are few hundreds bytes each as a result of ; compression. If you prefer a larger chunk size for better ; performance, enable output_buffering in addition. ; Note: You need to use zlib.output_handler instead of the standard ; output_handler, or otherwise the output will be corrupted. zlib.output_compression = Off ;zlib.output_compression_level = -1 ; You cannot specify additional output handlers if zlib.output_compression ; is activated here. This setting does the same as output_handler but in ; a different order. ;zlib.output_handler = ; Implicit flush tells PHP to tell the output layer to flush itself ; automatically after every output block. This is equivalent to calling the ; PHP function flush() after each and every call to print() or echo() and each ; and every HTML block. Turning this option on has serious performance ; implications and is generally recommended for debugging purposes only. implicit_flush = Off ; The unserialize callback function will be called (with the undefined class' ; name as parameter), if the unserializer finds an undefined class ; which should be instantiated. ; A warning appears if the specified function is not defined, or if the ; function doesn't include/implement the missing class. ; So only set this entry, if you really want to implement such a ; callback-function. unserialize_callback_func= ; When floats & doubles are serialized store serialize_precision significant ; digits after the floating point. The default value ensures that when floats ; are decoded with unserialize, the data will remain the same. serialize_precision = 100 ; Whether to enable the ability to force arguments to be passed by reference ; at function call time. This method is deprecated and is likely to be ; unsupported in future versions of PHP/Zend. The encouraged method of ; specifying which arguments should be passed by reference is in the function ; declaration. You're encouraged to try and turn this option Off and make ; sure your scripts work properly with it in order to ensure they will work ; with future versions of the language (you will receive a warning each time ; you use this feature, and the argument will be passed by value instead of by ; reference). allow_call_time_pass_reference = Off ; ; Safe Mode ; safe_mode = Off ; By default, Safe Mode does a UID compare check when ; opening files. If you want to relax this to a GID compare, ; then turn on safe_mode_gid. safe_mode_gid = Off ; When safe_mode is on, UID/GID checks are bypassed when ; including files from this directory and its subdirectories. ; (directory must also be in include_path or full path must ; be used when including) safe_mode_include_dir = ; When safe_mode is on, only executables located in the safe_mode_exec_dir ; will be allowed to be executed via the exec family of functions. safe_mode_exec_dir = ; Setting certain environment variables may be a potential security breach. ; This directive contains a comma-delimited list of prefixes. In Safe Mode, ; the user may only alter environment variables whose names begin with the ; prefixes supplied here. By default, users will only be able to set ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). ; ; Note: If this directive is empty, PHP will let the user modify ANY ; environment variable! safe_mode_allowed_env_vars = PHP_ ; This directive contains a comma-delimited list of environment variables that ; the end user won't be able to change using putenv(). These variables will be ; protected even if safe_mode_allowed_env_vars is set to allow to change them. safe_mode_protected_env_vars = LD_LIBRARY_PATH ; open_basedir, if set, limits all file operations to the defined directory ; and below. This directive makes most sense if used in a per-directory ; or per-virtualhost web server configuration file. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. ;open_basedir = ; This directive allows you to disable certain functions for security reasons. ; It receives a comma-delimited list of function names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. disable_functions = ; This directive allows you to disable certain classes for security reasons. ; It receives a comma-delimited list of class names. This directive is ; *NOT* affected by whether Safe Mode is turned On or Off. disable_classes = ; Colors for Syntax Highlighting mode. Anything that's acceptable in ; <span style="color: ???????"> would work. ;highlight.string = #DD0000 ;highlight.comment = #FF9900 ;highlight.keyword = #007700 ;highlight.bg = #FFFFFF ;highlight.default = #0000BB ;highlight.html = #000000 ; If enabled, the request will be allowed to complete even if the user aborts ; the request. Consider enabling it if executing long request, which may end up ; being interrupted by the user or a browser timing out. ; ignore_user_abort = On ; Determines the size of the realpath cache to be used by PHP. This value should ; be increased on systems where PHP opens many files to reflect the quantity of ; the file operations performed. ; realpath_cache_size=16k ; Duration of time, in seconds for which to cache realpath information for a given ; file or directory. For systems with rarely changing files, consider increasing this ; value. ; realpath_cache_ttl=120 ; ; Misc ; ; Decides whether PHP may expose the fact that it is installed on the server ; (e.g. by adding its signature to the Web server header). It is no security ; threat in any way, but it makes it possible to determine whether you use PHP ; on your server or not. expose_php = On ;;;;;;;;;;;;;;;;;;; ; Resource Limits ; ;;;;;;;;;;;;;;;;;;; max_execution_time = 30 ; Maximum execution time of each script, in seconds max_input_time = 60 ; Maximum amount of time each script may spend parsing request data ;max_input_nesting_level = 64 ; Maximum input variable nesting level memory_limit = 128M ; Maximum amount of memory a script may consume (128MB) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; Error handling and logging ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; error_reporting is a bit-field. Or each number up to get desired error ; reporting level ; E_ALL - All errors and warnings (doesn't include E_STRICT) ; E_ERROR - fatal run-time errors ; E_RECOVERABLE_ERROR - almost fatal run-time errors ; E_WARNING - run-time warnings (non-fatal errors) ; E_PARSE - compile-time parse errors ; E_NOTICE - run-time notices (these are warnings which often result ; from a bug in your code, but it's possible that it was ; intentional (e.g., using an uninitialized variable and ; relying on the fact it's automatically initialized to an ; empty string) ; E_STRICT - run-time notices, enable to have PHP suggest changes ; to your code which will ensure the best interoperability ; and forward compatibility of your code ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's ; initial startup ; E_COMPILE_ERROR - fatal compile-time errors ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) ; E_USER_ERROR - user-generated error message ; E_USER_WARNING - user-generated warning message ; E_USER_NOTICE - user-generated notice message ; ; Examples: ; ; - Show all errors, except for notices and coding standards warnings ; ;error_reporting = E_ALL & ~E_NOTICE ; ; - Show all errors, except for notices ; ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT ; ; - Show only errors ; ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR ; ; - Show all errors, except coding standards warnings ; error_reporting = E_ALL ; Print out errors (as a part of the output). For production web sites, ; you're strongly encouraged to turn this feature off, and use error logging ; instead (see below). Keeping display_errors enabled on a production web site ; may reveal security information to end users, such as file paths on your Web ; server, your database schema or other information. ; ; possible values for display_errors: ; ; Off - Do not display any errors ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!) ; On or stdout - Display errors to STDOUT (default) ; ; To output errors to STDERR with CGI/CLI: ;display_errors = "stderr" ; ; Default ; display_errors = Off ; Even when display_errors is on, errors that occur during PHP's startup ; sequence are not displayed. It's strongly recommended to keep ; display_startup_errors off, except for when debugging. display_startup_errors = Off ; Log errors into a log file (server-specific log, stderr, or error_log (below)) ; As stated above, you're strongly advised to use error logging in place of ; error displaying on production web sites. log_errors = On ; Set maximum length of log_errors. In error_log information about the source is ; added. The default is 1024 and 0 allows to not apply any maximum length at all. log_errors_max_len = 1024 ; Do not log repeated messages. Repeated errors must occur in same file on same ; line until ignore_repeated_source is set true. ignore_repeated_errors = Off ; Ignore source of message when ignoring repeated messages. When this setting ; is On you will not log errors with repeated messages from different files or ; source lines. ignore_repeated_source = Off ; If this parameter is set to Off, then memory leaks will not be shown (on ; stdout or in the log). This has only effect in a debug compile, and if ; error reporting includes E_WARNING in the allowed list report_memleaks = On ;report_zend_debug = 0 ; Store the last error/warning message in $php_errormsg (boolean). track_errors = Off ; Disable the inclusion of HTML tags in error messages. ; Note: Never use this feature for production boxes. ;html_errors = Off ; If html_errors is set On PHP produces clickable error messages that direct ; to a page describing the error or function causing the error in detail. ; You can download a copy of the PHP manual from http://www.php.net/docs.php ; and change docref_root to the base URL of your local copy including the ; leading '/'. You must also specify the file extension being used including ; the dot. ; Note: Never use this feature for production boxes. ;docref_root = "/phpmanual/" ;docref_ext = .html ; String to output before an error message. ;error_prepend_string = "<font color=#ff0000>" ; String to output after an error message. ;error_append_string = "</font>" ; Log errors to specified file. ;error_log = filename ; Log errors to syslog (Event Log on NT, not valid in Windows 95). ;error_log = syslog ;;;;;;;;;;;;;;;;; ; Data Handling ; ;;;;;;;;;;;;;;;;; ; ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 ; The separator used in PHP generated URLs to separate arguments. ; Default is "&". ;arg_separator.output = "&" ; List of separator(s) used by PHP to parse input URLs into variables. ; Default is "&". ; NOTE: Every character in this directive is considered as separator! ;arg_separator.input = ";&" ; This directive describes the order in which PHP registers GET, POST, Cookie, ; Environment and Built-in variables (G, P, C, E & S respectively, often ; referred to as EGPCS or GPC). Registration is done from left to right, newer ; values override older values. variables_order = "GPCS" ; Whether or not to register the EGPCS variables as global variables. You may ; want to turn this off if you don't want to clutter your scripts' global scope ; with user data. This makes most sense when coupled with track_vars - in which ; case you can access all of the GPC variables through the $HTTP_*_VARS[], ; variables. ; ; You should do your best to write your scripts so that they do not require ; register_globals to be on; Using form variables as globals can easily lead ; to possible security problems, if the code is not very well thought of. register_globals = Off ; Whether or not to register the old-style input arrays, HTTP_GET_VARS ; and friends. If you're not using them, it's recommended to turn them off, ; for performance reasons. register_long_arrays = Off ; This directive tells PHP whether to declare the argv&argc variables (that ; would contain the GET information). If you don't use these variables, you ; should turn it off for increased performance. register_argc_argv = Off ; When enabled, the SERVER and ENV variables are created when they're first ; used (Just In Time) instead of when the script starts. If these variables ; are not used within a script, having this directive on will result in a ; performance gain. The PHP directives register_globals, register_long_arrays, ; and register_argc_argv must be disabled for this directive to have any affect. auto_globals_jit = On ; Maximum size of POST data that PHP will accept. post_max_size = 8M ; Magic quotes ; ; Magic quotes for incoming GET/POST/Cookie data. magic_quotes_gpc = Off ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. magic_quotes_runtime = Off ; Use Sybase-style magic quotes (escape ' with '' instead of \'). magic_quotes_sybase = Off ; Automatically add files before or after any PHP document. auto_prepend_file = auto_append_file = ; As of 4.0b4, PHP always outputs a character encoding by default in ; the Content-type: header. To disable sending of the charset, simply ; set it to be empty. ; ; PHP's built-in default is text/html default_mimetype = "text/html" ;default_charset = "iso-8859-1" ; Always populate the $HTTP_RAW_POST_DATA variable. ;always_populate_raw_post_data = On ;;;;;;;;;;;;;;;;;;;;;;;;; ; Paths and Directories ; ;;;;;;;;;;;;;;;;;;;;;;;;; ; UNIX: "/path1:/path2" ;include_path = ".:/php/includes" ; ; Windows: "\path1;\path2" ;include_path = ".;c:\php\includes" ; The root of the PHP pages, used only if nonempty. ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root ; if you are running php as a CGI under any web server (other than IIS) ; see documentation for security issues. The alternate is to use the ; cgi.force_redirect configuration below doc_root = ; The directory under which PHP opens the script using /~username used only ; if nonempty. user_dir = ; Directory in which the loadable extensions (modules) reside. extension_dir ="C:\Arquivos de programas\PHP\ext" ; Whether or not to enable the dl() function. The dl() function does NOT work ; properly in multithreaded servers, such as IIS or Zeus, and is automatically ; disabled on them. enable_dl = On ; cgi.force_redirect is necessary to provide security running PHP as a CGI under ; most web servers. Left undefined, PHP turns this on by default. You can ; turn it off here AT YOUR OWN RISK ; **You CAN safely turn this off for IIS, in fact, you MUST.** ; cgi.force_redirect = 1 ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with ; every request. ; cgi.nph = 1 ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP ; will look for to know it is OK to continue execution. Setting this variable MAY ; cause security issues, KNOW WHAT YOU ARE DOING FIRST. ; cgi.redirect_status_env = ; ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. ; cgi.fix_pathinfo=1 ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate ; security tokens of the calling client. This allows IIS to define the ; security context that the request runs under. mod_fastcgi under Apache ; does not currently support this feature (03/17/2002) ; Set to 1 if running under IIS. Default is zero. ; fastcgi.impersonate = 1; ; Disable logging through FastCGI connection ; fastcgi.logging = 0 ; cgi.rfc2616_headers configuration option tells PHP what type of headers to ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that ; is supported by Apache. When this option is set to 1 PHP will send ; RFC2616 compliant header. ; Default is zero. ;cgi.rfc2616_headers = 0 ;;;;;;;;;;;;;;;; ; File Uploads ; ;;;;;;;;;;;;;;;; ; Whether to allow HTTP file uploads. file_uploads = On ; Temporary directory for HTTP uploaded files (will use system default if not ; specified). ;upload_tmp_dir = ; Maximum allowed size for uploaded files. upload_max_filesize = 2M ;;;;;;;;;;;;;;;;;; ; Fopen wrappers ; ;;;;;;;;;;;;;;;;;; ; Whether to allow the treatment of URLs (like http:// or ftp://) as files. allow_url_fopen = On ; Whether to allow include/require to open URLs (like http:// or ftp://) as files. allow_url_include = Off ; Define the anonymous ftp password (your email address) ;from="john@doe.com" ; Define the User-Agent string ; user_agent="PHP" ; Default timeout for socket based streams (seconds) default_socket_timeout = 60 upload_tmp_dir="C:\WINDOWS\Temp" session.save_path="C:\WINDOWS\Temp" ; If your scripts have to deal with files from Macintosh systems, ; or you are running on a Mac and need to deal with files from ; unix or win32 systems, setting this flag will cause PHP to ; automatically detect the EOL character in those files so that ; fgets() and file() will work regardless of the source of the file. ; auto_detect_line_endings = Off ;;;;;;;;;;;;;;;;;;;;;; ; Dynamic Extensions ; ;;;;;;;;;;;;;;;;;;;;;; ; ; If you wish to have an extension loaded automatically, use the following ; syntax: ; ; extension=modulename.extension ; ; For example, on Windows: ; ; extension=msql.dll ; ; ... or under UNIX: ; ; extension=msql.so ; ; Note that it should be the name of the module only; no directory information ; needs to go here. Specify the location of the extension with the ; extension_dir directive above. ; Windows Extensions ; Note that ODBC support is built in, so no dll is needed for it. ; Note that many DLL files are located in the extensions/ (PHP 4) ext/ (PHP 5) ; extension folders as well as the separate PECL DLL download (PHP 5). ; Be sure to appropriately set the extension_dir directive. ;;;;;;;;;;;;;;;;;;; ; Module Settings ; ;;;;;;;;;;;;;;;;;;; [Date] ; Defines the default timezone used by the date functions ;date.timezone = ;date.default_latitude = 31.7667 ;date.default_longitude = 35.2333 ;date.sunrise_zenith = 90.583333 ;date.sunset_zenith = 90.583333 [filter] ;filter.default = unsafe_raw ;filter.default_flags = [iconv] ;iconv.input_encoding = ISO-8859-1 ;iconv.internal_encoding = ISO-8859-1 ;iconv.output_encoding = ISO-8859-1 [sqlite] ;sqlite.assoc_case = 0 [xmlrpc] ;xmlrpc_error_number = 0 ;xmlrpc_errors = 0 [Pcre] ;PCRE library backtracking limit. ;pcre.backtrack_limit=100000 ;PCRE library recursion limit. ;Please note that if you set this value to a high number you may consume all ;the available process stack and eventually crash PHP (due to reaching the ;stack size limit imposed by the Operating System). ;pcre.recursion_limit=100000 [Syslog] ; Whether or not to define the various syslog variables (e.g. $LOG_PID, ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In ; runtime, you can define these variables by calling define_syslog_variables(). define_syslog_variables = Off [mail function] ; For Win32 only. SMTP = localhost smtp_port = 25 ; For Win32 only. ;sendmail_from = me@example.com ; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). ;sendmail_path = ; Force the addition of the specified parameters to be passed as extra parameters ; to the sendmail binary. These parameters will always replace the value of ; the 5th parameter to mail(), even in safe mode. ;mail.force_extra_parameters = [SQL] sql.safe_mode = Off [ODBC] ;odbc.default_db = Not yet implemented ;odbc.default_user = Not yet implemented ;odbc.default_pw = Not yet implemented ; Allow or prevent persistent links. odbc.allow_persistent = On ; Check that a connection is still valid before reuse. odbc.check_persistent = On ; Maximum number of persistent links. -1 means no limit. odbc.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. odbc.max_links = -1 ; Handling of LONG fields. Returns number of bytes to variables. 0 means ; passthru. odbc.defaultlrl = 4096 ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation ; of uodbc.defaultlrl and uodbc.defaultbinmode odbc.defaultbinmode = 1 [MySQL] ; Allow or prevent persistent links. mysql.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. mysql.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. mysql.max_links = -1 ; Default port number for mysql_connect(). If unset, mysql_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. mysql.default_port = ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. mysql.default_socket = ; Default host for mysql_connect() (doesn't apply in safe mode). mysql.default_host = ; Default user for mysql_connect() (doesn't apply in safe mode). mysql.default_user = ; Default password for mysql_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. mysql.default_password = ; Maximum time (in seconds) for connect timeout. -1 means no limit mysql.connect_timeout = 60 ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and ; SQL-Errors will be displayed. mysql.trace_mode = Off [MySQLi] ; Maximum number of links. -1 means no limit. mysqli.max_links = -1 ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the ; compile-time value defined MYSQL_PORT (in that order). Win32 will only look ; at MYSQL_PORT. mysqli.default_port = 3306 ; Default socket name for local MySQL connects. If empty, uses the built-in ; MySQL defaults. mysqli.default_socket = ; Default host for mysql_connect() (doesn't apply in safe mode). mysqli.default_host = ; Default user for mysql_connect() (doesn't apply in safe mode). mysqli.default_user = ; Default password for mysqli_connect() (doesn't apply in safe mode). ; Note that this is generally a *bad* idea to store passwords in this file. ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw") ; and reveal this password! And of course, any users with read access to this ; file will be able to reveal the password as well. mysqli.default_pw = ; Allow or prevent reconnect mysqli.reconnect = Off [mSQL] ; Allow or prevent persistent links. msql.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. msql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. msql.max_links = -1 [OCI8] ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA) ;oci8.privileged_connect = Off ; Connection: The maximum number of persistent OCI8 connections per ; process. Using -1 means no limit. ;oci8.max_persistent = -1 ; Connection: The maximum number of seconds a process is allowed to ; maintain an idle persistent connection. Using -1 means idle ; persistent connections will be maintained forever. ;oci8.persistent_timeout = -1 ; Connection: The number of seconds that must pass before issuing a ; ping during oci_pconnect() to check the connection validity. When ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables ; pings completely. ;oci8.ping_interval = 60 ; Tuning: This option enables statement caching, and specifies how ; many statements to cache. Using 0 disables statement caching. ;oci8.statement_cache_size = 20 ; Tuning: Enables statement prefetching and sets the default number of ; rows that will be fetched automatically after statement execution. ;oci8.default_prefetch = 10 ; Compatibility. Using On means oci_close() will not close ; oci_connect() and oci_new_connect() connections. ;oci8.old_oci_close_semantics = Off [PostgresSQL] ; Allow or prevent persistent links. pgsql.allow_persistent = On ; Detect broken persistent links always with pg_pconnect(). ; Auto reset feature requires a little overheads. pgsql.auto_reset_persistent = Off ; Maximum number of persistent links. -1 means no limit. pgsql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. pgsql.max_links = -1 ; Ignore PostgreSQL backends Notice message or not. ; Notice message logging require a little overheads. pgsql.ignore_notice = 0 ; Log PostgreSQL backends Noitce message or not. ; Unless pgsql.ignore_notice=0, module cannot log notice message. pgsql.log_notice = 0 [Sybase] ; Allow or prevent persistent links. sybase.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. sybase.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. sybase.max_links = -1 ;sybase.interface_file = "/usr/sybase/interfaces" ; Minimum error severity to display. sybase.min_error_severity = 10 ; Minimum message severity to display. sybase.min_message_severity = 10 ; Compatibility mode with old versions of PHP 3.0. ; If on, this will cause PHP to automatically assign types to results according ; to their Sybase type, instead of treating them all as strings. This ; compatibility mode will probably not stay around forever, so try applying ; whatever necessary changes to your code, and turn it off. sybase.compatability_mode = Off [Sybase-CT] ; Allow or prevent persistent links. sybct.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. sybct.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. sybct.max_links = -1 ; Minimum server message severity to display. sybct.min_server_severity = 10 ; Minimum client message severity to display. sybct.min_client_severity = 10 [bcmath] ; Number of decimal digits for all bcmath functions. bcmath.scale = 0 [browscap] ;browscap = extra/browscap.ini [Informix] ; Default host for ifx_connect() (doesn't apply in safe mode). ifx.default_host = ; Default user for ifx_connect() (doesn't apply in safe mode). ifx.default_user = ; Default password for ifx_connect() (doesn't apply in safe mode). ifx.default_password = ; Allow or prevent persistent links. ifx.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. ifx.max_persistent = -1 ; Maximum number of links (persistent + non-persistent). -1 means no limit. ifx.max_links = -1 ; If on, select statements return the contents of a text blob instead of its id. ifx.textasvarchar = 0 ; If on, select statements return the contents of a byte blob instead of its id. ifx.byteasvarchar = 0 ; Trailing blanks are stripped from fixed-length char columns. May help the ; life of Informix SE users. ifx.charasvarchar = 0 ; If on, the contents of text and byte blobs are dumped to a file instead of ; keeping them in memory. ifx.blobinfile = 0 ; NULL's are returned as empty strings, unless this is set to 1. In that case, ; NULL's are returned as string 'NULL'. ifx.nullformat = 0 [Session] ; Handler used to store/retrieve data. session.save_handler = files ; Argument passed to save_handler. In the case of files, this is the path ; where data files are stored. Note: Windows users have to change this ; variable in order to use PHP's session functions. ; ; As of PHP 4.0.1, you can define the path as: ; ; session.save_path = "N;/path" ; ; where N is an integer. Instead of storing all the session files in ; /path, what this will do is use subdirectories N-levels deep, and ; store the session data in those directories. This is useful if you ; or your OS have problems with lots of files in one directory, and is ; a more efficient layout for servers that handle lots of sessions. ; ; NOTE 1: PHP will not create this directory structure automatically. ; You can use the script in the ext/session dir for that purpose. ; NOTE 2: See the section on garbage collection below if you choose to ; use subdirectories for session storage ; ; The file storage module creates files using mode 600 by default. ; You can change that by using ; ; session.save_path = "N;MODE;/path" ; ; where MODE is the octal representation of the mode. Note that this ; does not overwrite the process's umask. ;session.save_path = "/tmp" ; Whether to use cookies. session.use_cookies = 1 ;session.cookie_secure = ; This option enables administrators to make their users invulnerable to ; attacks which involve passing session ids in URLs; defaults to 0. ; session.use_only_cookies = 1 ; Name of the session (used as cookie name). session.name = PHPSESSID ; Initialize session on request startup. session.auto_start = 0 ; Lifetime in seconds of cookie or, if 0, until browser is restarted. session.cookie_lifetime = 0 ; The path for which the cookie is valid. session.cookie_path = / ; The domain for which the cookie is valid. session.cookie_domain = ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript. session.cookie_httponly = ; Handler used to serialize data. php is the standard serializer of PHP. session.serialize_handler = php ; Define the probability that the 'garbage collection' process is started ; on every session initialization. ; The probability is calculated by using gc_probability/gc_divisor, ; e.g. 1/100 means there is a 1% chance that the GC process starts ; on each request. session.gc_probability = 1 session.gc_divisor = 1000 ; After this number of seconds, stored data will be seen as 'garbage' and ; cleaned up by the garbage collection process. session.gc_maxlifetime = 1440 ; NOTE: If you are using the subdirectory option for storing session files ; (see session.save_path above), then garbage collection does *not* ; happen automatically. You will need to do your own garbage ; collection through a shell script, cron entry, or some other method. ; For example, the following script would is the equivalent of ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes): ; cd /path/to/sessions; find -cmin +24 | xargs rm ; PHP 4.2 and less have an undocumented feature/bug that allows you to ; to initialize a session variable in the global scope, albeit register_globals ; is disabled. PHP 4.3 and later will warn you, if this feature is used. ; You can disable the feature and the warning separately. At this time, ; the warning is only displayed, if bug_compat_42 is enabled. session.bug_compat_42 = 0 session.bug_compat_warn = 1 ; Check HTTP Referer to invalidate externally stored URLs containing ids. ; HTTP_REFERER has to contain this substring for the session to be ; considered as valid. session.referer_check = ; How many bytes to read from the file. session.entropy_length = 0 ; Specified here to create the session id. session.entropy_file = ;session.entropy_length = 16 ;session.entropy_file = /dev/urandom ; Set to {nocache,private,public,} to determine HTTP caching aspects ; or leave this empty to avoid sending anti-caching headers. session.cache_limiter = nocache ; Document expires after n minutes. session.cache_expire = 180 ; trans sid support is disabled by default. ; Use of trans sid may risk your users security. ; Use this option with caution. ; - User may send URL contains active session ID ; to other person via. email/irc/etc. ; - URL that contains active session ID may be stored ; in publically accessible computer. ; - User may access your site with the same session ID ; always using URL stored in browser's history or bookmarks. session.use_trans_sid = 0 ; Select a hash function ; 0: MD5 (128 bits) ; 1: SHA-1 (160 bits) session.hash_function = 0 ; Define how many bits are stored in each character when converting ; the binary hash data to something readable. ; ; 4 bits: 0-9, a-f ; 5 bits: 0-9, a-v ; 6 bits: 0-9, a-z, A-Z, "-", "," session.hash_bits_per_character = 5 ; The URL rewriter will look for URLs in a defined set of HTML tags. ; form/fieldset are special; if you include them here, the rewriter will ; add a hidden <input> field with the info which is otherwise appended ; to URLs. If you want XHTML conformity, remove the form entry. ; Note that all valid entries require a "=", even if no value follows. url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" [MSSQL] ; Allow or prevent persistent links. mssql.allow_persistent = On ; Maximum number of persistent links. -1 means no limit. mssql.max_persistent = -1 ; Maximum number of links (persistent+non persistent). -1 means no limit. mssql.max_links = -1 ; Minimum error severity to display. mssql.min_error_severity = 10 ; Minimum message severity to display. mssql.min_message_severity = 10 ; Compatibility mode with old versions of PHP 3.0. mssql.compatability_mode = Off ; Connect timeout ;mssql.connect_timeout = 5 ; Query timeout ;mssql.timeout = 60 ; Valid range 0 - 2147483647. Default = 4096. ;mssql.textlimit = 4096 ; Valid range 0 - 2147483647. Default = 4096. ;mssql.textsize = 4096 ; Limits the number of records in each batch. 0 = all records in one batch. ;mssql.batchsize = 0 ; Specify how datetime and datetim4 columns are returned ; On => Returns data converted to SQL server settings ; Off => Returns values as YYYY-MM-DD hh:mm:ss ;mssql.datetimeconvert = On ; Use NT authentication when connecting to the server mssql.secure_connection = Off ; Specify max number of processes. -1 = library default ; msdlib defaults to 25 ; FreeTDS defaults to 4096 ;mssql.max_procs = -1 ; Specify client character set. ; If empty or not set the client charset from freetds.comf is used ; This is only used when compiled with FreeTDS ;mssql.charset = "ISO-8859-1" [Assertion] ; Assert(expr); active by default. ;assert.active = On ; Issue a PHP warning for each failed assertion. ;assert.warning = On ; Don't bail out by default. ;assert.bail = Off ; User-function to be called if an assertion fails. ;assert.callback = 0 ; Eval the expression with current error_reporting(). Set to true if you want ; error_reporting(0) around the eval(). ;assert.quiet_eval = 0 [COM] ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs ;com.typelib_file = ; allow Distributed-COM calls ;com.allow_dcom = true ; autoregister constants of a components typlib on com_load() ;com.autoregister_typelib = true ; register constants casesensitive ;com.autoregister_casesensitive = false ; show warnings on duplicate constant registrations ;com.autoregister_verbose = true [mbstring] ; language for internal character representation. ;mbstring.language = Japanese ; internal/script encoding. ; Some encoding cannot work as internal encoding. ; (e.g. SJIS, BIG5, ISO-2022-*) ;mbstring.internal_encoding = EUC-JP ; http input encoding. ;mbstring.http_input = auto ; http output encoding. mb_output_handler must be ; registered as output buffer to function ;mbstring.http_output = SJIS ; enable automatic encoding translation according to ; mbstring.internal_encoding setting. Input chars are ; converted to internal encoding by setting this to On. ; Note: Do _not_ use automatic encoding translation for ; portable libs/applications. ;mbstring.encoding_translation = Off ; automatic encoding detection order. ; auto means ;mbstring.detect_order = auto ; substitute_character used when character cannot be converted ; one from another ;mbstring.substitute_character = none; ; overload(replace) single byte functions by mbstring functions. ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), ; etc. Possible values are 0,1,2,4 or combination of them. ; For example, 7 for overload everything. ; 0: No overload ; 1: Overload mail() function ; 2: Overload str*() functions ; 4: Overload ereg*() functions ;mbstring.func_overload = 0 ; enable strict encoding detection. ;mbstring.strict_encoding = Off [FrontBase] ;fbsql.allow_persistent = On ;fbsql.autocommit = On ;fbsql.show_timestamp_decimals = Off ;fbsql.default_database = ;fbsql.default_database_password = ;fbsql.default_host = ;fbsql.default_password = ;fbsql.default_user = "_SYSTEM" ;fbsql.generate_warnings = Off ;fbsql.max_connections = 128 ;fbsql.max_links = 128 ;fbsql.max_persistent = -1 ;fbsql.max_results = 128 [gd] ; Tell the jpeg decode to libjpeg warnings and try to create ; a gd image. The warning will then be displayed as notices ; disabled by default ;gd.jpeg_ignore_warning = 0 [exif] ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. ; With mbstring support this will automatically be converted into the encoding ; given by corresponding encode setting. When empty mbstring.internal_encoding ; is used. For the decode settings you can distinguish between motorola and ; intel byte order. A decode setting cannot be empty. ;exif.encode_unicode = ISO-8859-15 ;exif.decode_unicode_motorola = UCS-2BE ;exif.decode_unicode_intel = UCS-2LE ;exif.encode_jis = ;exif.decode_jis_motorola = JIS ;exif.decode_jis_intel = JIS [Tidy] ; The path to a default tidy configuration file to use when using tidy ;tidy.default_config = /usr/local/lib/php/default.tcfg ; Should tidy clean and repair output automatically? ; WARNING: Do not use this option if you are generating non-html content ; such as dynamic images tidy.clean_output = Off [soap] ; Enables or disables WSDL caching feature. soap.wsdl_cache_enabled=1 ; Sets the directory name where SOAP extension will put cache files. soap.wsdl_cache_dir="/tmp" ; (time to live) Sets the number of second while cached file will be used ; instead of original one. soap.wsdl_cache_ttl=86400 ; Local Variables: ; tab-width: 4 ; End: [PHP_MYSQL] extension=php_mysql.dll

0
 
Avatar do usuário
ADMIN
ADMIN
Mensagens: 17739
Nome: Kleber
Descrição do site: Onde você encontra scripts grátis para o seu site
Sexo: Masculino
Localização: RJ / RJ / Brasil
Contato:

contador de acesso ao site

03-11-2008 12:26

O lance é você verificar em outros servidores, porque pode ser configuração do PHP realmente. Aqui tanto no Xampp em localhost quanto no meu servidor online está OK.
0
A melhor hospedagem para o seu site HostGator!
 
Mais de 75 postagens
Mais de 75 postagens
Mensagens: 76
Sexo: Masculino
Localização: Porto Alegre
Contato:

contador de acesso ao site

05-11-2008 23:08

Agora meu site está disponível no domínio http://www.imoveiscenter.com.br e tanto
o diretório /files quanto o arquivo contador.txt estão com permissões 777 mas continua
contando sem limite. Agora também aparece um perigo do php antes da resposta.

olha lá.

:confused
0
 
Mais de 75 postagens
Mais de 75 postagens
Mensagens: 76
Sexo: Masculino
Localização: Porto Alegre
Contato:

contador de acesso ao site

05-11-2008 23:10

No rodapé aparece assim:
Acessos:
Warning: Cannot modify header information - headers already sent by (output started at /home/httpd/vhosts/imoveiscenter.com.br/httpdocs/index.php:2) in /home/httpd/vhosts/imoveiscenter.com.br/httpdocs/files/contador.php on line 14
1637
Era pra ser só Acessos: 1637 e limitado pelo cookie.
0
 
Avatar do usuário
ADMIN
ADMIN
Mensagens: 17739
Nome: Kleber
Descrição do site: Onde você encontra scripts grátis para o seu site
Sexo: Masculino
Localização: RJ / RJ / Brasil
Contato:

contador de acesso ao site

05-11-2008 23:25

Seu script deve ter algum header ou session_start() sem estar na primeira linha do script, exemplo:

CORRETO:

<?php
session_start();
// restante...

Quando linhas como essa que devem ser a primeira do script PHP estão abaixo de outras linhas retorna esse erro.

O ideal é que verifique ai, mas, se precisar contornar o problema, use essa linha no topo do PHP da página.
<?php ob_start(); ?>
0
A melhor hospedagem para o seu site HostGator!
 
Mais de 75 postagens
Mais de 75 postagens
Mensagens: 76
Sexo: Masculino
Localização: Porto Alegre
Contato:

contador de acesso ao site

06-11-2008 00:21

/files/contador.php
<?php ob_start(); ?> <?php session_start(); // Contador de acessos $arquivo = "files/contador.txt"; $valor = 1; // Valor agregado por visita $timer = time()+3600; // Duração do cookie para não contar o mesmo ip (3600s = 1h) $id = fopen($arquivo, "r+"); $conteudo = fread($id,filesize($arquivo)); fclose($id); if($_COOKIE['NotCont']=='') { $conteudo += $valor; $id = fopen($arquivo, "r+"); fwrite($id, $conteudo, strlen($conteudo)); fclose($id); SetCookie("NotCont",$_SERVER['REMOTE_ADDR'],$timer); } else { SetCookie("NotCont",$_SERVER['REMOTE_ADDR'],$timer); } echo "$conteudo"; ?>

Agora apareceu mais erros:

Acessos:
Warning: session_start(): Cannot send session cookie - headers already sent by (output started at /home/httpd/vhosts/imoveiscenter.com.br/httpdocs/index.php:2) in /home/httpd/vhosts/imoveiscenter.com.br/httpdocs/files/contador.php on line 3

Warning: session_start(): Cannot send session cache limiter - headers already sent (output started at /home/httpd/vhosts/imoveiscenter.com.br/httpdocs/index.php:2) in /home/httpd/vhosts/imoveiscenter.com.br/httpdocs/files/contador.php on line 3

Warning: Cannot modify header information - headers already sent by (output started at /home/httpd/vhosts/imoveiscenter.com.br/httpdocs/index.php:2) in /home/httpd/vhosts/imoveiscenter.com.br/httpdocs/files/contador.php on line 16
1669

:shock
0
 
Avatar do usuário
ADMIN
ADMIN
Mensagens: 17739
Nome: Kleber
Descrição do site: Onde você encontra scripts grátis para o seu site
Sexo: Masculino
Localização: RJ / RJ / Brasil
Contato:

contador de acesso ao site

06-11-2008 07:58

Pelo que ví você não entendeu :blush

Dá mesma forma do HTML onde há uma ordem a ser seguida pelos códigos na página, por exemplo:

<html>
<head>
<title>título</title>
<body>conteúdo do site</body>
</html>

No php há algo parecido.
Seu documento está no formato PHP, certo?

Existem várias linhas:

doc.php
linha1 ...
linha2 ...
linha3 ...

Eu não indiquei colocar ob_start() lá perto do contador, depois de todos seu código da página, indiquei para colocar na primeira linha ativa da página

Vê ai qual a primeira linha do arquivo

Imagem
0
A melhor hospedagem para o seu site HostGator!
 
Mais de 75 postagens
Mais de 75 postagens
Mensagens: 76
Sexo: Masculino
Localização: Porto Alegre
Contato:

contador de acesso ao site

06-11-2008 10:00

Foi mal.

Agora funciona!

Valeu!
0
 
Avatar do usuário
ADMIN
ADMIN
Mensagens: 17739
Nome: Kleber
Descrição do site: Onde você encontra scripts grátis para o seu site
Sexo: Masculino
Localização: RJ / RJ / Brasil
Contato:

contador de acesso ao site

06-11-2008 13:58

:8-)
0
A melhor hospedagem para o seu site HostGator!

Quem está online

Usuários navegando neste fórum: Nenhum usuário registrado